Welfare cabin water monitoring.

Know when the fresh water in a welfare cabin is running low, and when the waste tank needs emptying, without anyone walking over to check. A battery sensor in each tank reads it every hour and sends the level to your phone.

Site welfare cabins, diggers and a bulldozer behind fencing on a rail construction site
Welfare cabins and plant on a rail construction site in Leamington Spa. Photo: Robin Stott.

When a cabin runs dry.

Drinking water, washing and toilets are a legal requirement on construction sites under the CDM Regulations 2015. When a cabin runs dry or the waste tank fills, people stop work or leave site, and someone has to arrange an emergency fill or tanker.

Most sites guess instead: someone dips the tanks, or fills and empties on a fixed round whether they need it or not.

How it works on a cabin.

A sensor goes in the hatch of the fresh water tank and another in the waste tank. It measures from above with ultrasound, so it never touches the water or the waste. One gateway on site covers every cabin and sends the readings over 4G, so you don’t need mains power or site Wi-Fi.

You see each tank’s level, the litres left and an estimate of when it will be empty or full. An alarm email goes out at the level you choose, so you can book a fill or an emptying a few days ahead, and only when it’s actually needed.

For the tanker driver too.

Each tank gets a QR label. The driver scans it before filling or emptying, checks it’s the right tank and sees its current level, without an app or a login. Every fill and emptying is logged, which gives you a record for the waste contractor’s invoice.

Questions

Does it need power on site?
No. The sensors and the gateway run on batteries and the gateway uses 4G, so there is nothing to plug in.
Will it work on the waste tank?
Yes. The sensor measures from above with ultrasound and never touches the contents.
What happens if the 4G signal drops?
The gateway keeps the readings and sends them the next hour, so none are lost.
Can we move the sensors when the job ends?
Yes. Sensors and gateways are rented and move to your next site.
How much does it cost?
Crake Live, with sensors, is a monthly rental priced for your site. Crake Log, with QR labels and readings typed in by staff, is £12 per tank a month. Prices are on the home page.
Get a quote WhatsApp