Tank and water monitoring for rail sites.
Welfare water and waste, generator fuel, drainage and rail temperature on one screen, with alarms to your own site team.
Welfare and plant in the compound.
Book the water fill and the waste emptying when the tank says so, not on a fixed round. Generators and bowsers warn you before they run dry, and a sudden drop in fuel sends an alarm.
Water levels at culverts and drains.
A sensor over a culvert, drain or ditch measures the water depth every hour. You set the levels to watch for, and Crake also warns when the water is rising fast.
Rail temperature.
A probe on the rail reports its temperature every hour. You set the warning and alarm levels from the track’s own critical rail temperature, so the right people hear before a speed restriction is needed.
No mains and no wiring.
Each sensor has its own battery and talks by radio to one gateway, which sends the readings over 4G. Nothing is wired to the cabins or the track.
Fitting uses a guided page on a phone, which checks the signal before the installer leaves. On or near the line, your own PTS-qualified team fits the kit and we support them by phone on the day.
Start with one site.
Look round the demo dashboard first, then try Crake on one compound before rolling it out.